PINPOINT IP Camera focusing tool
- Compact IP camera focusing tool
- Male RJ-45 connector attached to plug into camera
- 2 x Female RJ-45 connectors for connection of PoE source and connection to laptop
Great for...
- Quickly adjusting focus on an IP camera
- Reducing time and expense of installation by eliminating the need to call back and forth to the office while adjusting IP Camera focus
- Diagnosing issues with a camera at the camera
Adjust the focus on IP cameras easily with the new PINPOINT IP Camera focusing tool. With the advent of MegaPixel IP cameras, it has become increasingly difficult to adjust the focus on these cameras. Due to the increased pixel density, minor adjustments of the lens will equate to large differences in the focus of the camera itself. Therefore, calling back and forth to the office where the IP camera is being displayed is not always a great solution. The PINPOINT IP Camera focusing tool is a great addition to any installer's toolbag, providing the ability to adjust the camera from a miniature laptop while at the camera.
The PINPOINT IP Camera focusing tool provides a pass-through for the PoE (Power over Ethernet) power to the camera, while re-directing the network to your laptop so that you can view the image and make adjustments to the camera. This can save you from having to call back and forth and save hours of time on each and every camera installation. Works with ANY IP Cameras and ANY laptop with ethernet network port.
